February, 2019 Issue 19.01

Performance Upgrades - It's Time

November, 2018 Issue 18.01

Transient Loadings - Are They the Peak Loadings?

September, 2017 Issue 17.05

Will "Betsy" Last to the Scheduled Shutdown?

June, 2017 Issue 17.04

Forensic Analysis - It Can Help When Data is Limited

May, 2017 Issue 17.03

Experience - Does it Still Count?

April, 2017 Issue 17.02

Transient Loadings - They may be the Peak Loadings!

March, 2017 Issue 17.01

Pressure Containment Equipment / Vibration of a Centrifugal Blower

November, 2016 Issue 16.04

Sizing of Inlet Headers for Cracked Gas Quench Systems

August, 2016 Issue 16.03

Polymer Lubricated Bearings: When it’s working, it’s Working Well

June, 2016 Issue 16.02

Acoustical Energy – Has It Bitten Your Bottom Line

March, 2016 Issue 16.01

Molecular Weight Effects on Liquid Ring Compressors

September, 2015 Issue 15.01

The Unlikely Structural Transient

September, 2014 Issue 14.02

Fit For Service

February, 2014 Issue 14.01

Acoustical Driven Vibrations - Don't Let it Fail You

November, 2013; Issue 13.04

The Complete Picture

October, 2013; Issue 13.03

Reciprocating Compressors Running Together - Is it a problem?

August, 2013; Issue 13.02

Miracle in the Gobi

February, 2013; Issue 13.01

What is the Load?

December, 2012; Issue 12.07

Large Fans Can Be Challenging

Septermber, 2012; Issue 12.06

Closed Relief Discharge Systems - Can be Complex

May, 2012; Issue 12.05

My Turbine has run for years...Why did it fail now?

April, 2012; Issue 12.04

Complex Heat Transfer Coefficients – They can be "Tricky"

March, 2012; Issue 12.02

Creep Analysis

February, 2012; Issue 12.03

Erosion Corrosion Control

January, 2012; Issue 12.01

Challenges of Steam Conditions

September, 2011; Issue 11.7

Fracture Analysis

August, 2011; Issue 11.6

Transient Local Flow Instability

July, 2011; Issue 11.5

Just Patch It Up

June, 2011; Issue 11.4

Acoustics - “It Can Rattle Your Cage”

April, 2011; Issue 11.3

Blade and Impeller Critical Frequencies

March, 2011; Issue 11.2

Critical Pipe Stress

December, 2010; Issue 10.7

Performance Upgrades – It’s Time”

November, 2010; Issue 10.6

Frequency Response – Detecting Complex Structural Defects

August, 2010; Issue 10.5

Machine Design – Heavy Industrial Applications

July, 2010; Issue 10.4

Will the Fracture Last…

June, 2010; Issue 10.3

Intensive Care and Life Support Systems

May, 2010; Issue 10.2

Open Face Impellers – Failure Analysis and Design

March, 2010; Issue 10.1

Blindly Using the ASME Code

December, 2009; Issue 09.5

Pipe Stress Loads on Rotating and Static Equipment

May, 2009; Issue 09.04

Refractory - Is It Working For You?

April, 2009; Issue 09.03

Heat Transfer - It is Involved in Most Every Industrial Situation

March, 2009; Issue 09.02

You Can’t Afford to Fail at Failure Analysis! - It’s Costly

February, 2009; Issue 09.01

Bolts Stress — Hanging by a Thread

Previous Articles...